Vendors, Devices & Services New to Our Directories
Measurement Device News
Vendor : Koop uw Xeltek SuperPro M Programmer bij Rato Elektronica
Rato Elektronica biedt u de beste prijzen voor SuperPro M Programmers in België & NederlandSuperPro M biedt u de meest recente Xeltek technologie aan de best mogelijke prijs. Op dit ogenblik is SuperPro M de best geprijsde SuperPro programmer die wordt aangeboden met volgende eigenschappen :
* Ondersteuning van ruim 20,000 devices van 160 verschillende fabrikanten
* Ultra-snelle programming w/ ARM7 32bit RISC MCU
* Standaard 48 pins driver
* In-system (ISP/ICP) en parallelle programming mogelijkheden
* USB 2.0 Interface
* Win 7 x64 O/S ondersteuning
* 2 jaar garantie
Read full article: 'Koop uw Xeltek SuperPro M Programmer bij Rato Elektronica'
Applications : Mantracourt Enables Wireless Torque Measurement in Student Motor Racing
Exeter, UK -- Mantracourt announce that its T24 wireless instrumentation range is being used in the development of racing cars for Formula SAE, an international engineering competition where student teams compete against each other, with single-seater race cars they have designed and built themselves.As a part of a sponsorship package for the 'Ecole de Technologie Superieure' engineering team from the University of Quebec in Canada, Mantracourt has been providing wireless strain gauge technology and technical support to enable drive shaft torque measurements during testing.
Read full article: 'Mantracourt Enables Wireless Torque Measurement in Student Motor Racing'
New Products : Latest UHF Gen 2 RFID Reader DL6940 Features 4 Antenna Ports
3 Working Modes - Real-Time Clock - Anti-conflict Function & More...
Guangzhou / Guangzhou, China -- DAILY RFID has announced the launch of the latest UHF Gen 2 RFID reader DL6940 with high identification accuracy. With 4 antenna ports, this Gen 2 RFID reader enables all the antennas to work at the same time, which promises extremely high working efficiency under easy operations.
Compliant with EPC Gen 2 standard, the data operations speed of this RFID reader is 4 times higher than other readers. It supports such high speed data operations as block mass erase and block mass write.
Plus, the DL6940 is available in 3 working modes, including initiative mode, answer mode and triggering mode.
Read full article: 'Latest UHF Gen 2 RFID Reader DL6940 Features 4 Antenna Ports'
New Products : The Smallest, Lightest, & Lowest Power GPS/INS
Tiny Sensor Outputs Position, Velocity and Attitude
Williston VT, USA -- MicroStrain announces the release of the newest in a line of innovative inertial sensors, the 3DM-GX3® -45 which is a GPS-aided inertial navigation system (GPS/INS). The on-board Kalman filter provides optimal position, velocity, and attitude (PVA) estimates. The 3DM-GX3-45 is in a class of its own, with high performance tracking capabilities comparable to higher cost units, yet with a very small footprint (44 mm x 25 mm) and extremely light weight (23 grams).
It provides an ideal solution for a variety of applications including vehicle tracking, camera pointing, antenna pointing, and unmanned aerial and micro vehicle navigation.
Additionally, its ability to integrate third party GPS and/or heading sensor inputs means that it can take advantage of existing navigation components that may already be in place.
Read full article: 'The Smallest, Lightest, & Lowest Power GPS/INS'
New Products : 3D Video Tracking System
Features Tracking Accuracy of Better Than 0.2 DegreesDesigned to enable engineers and ballisticians fully understand the flight behaviour of high speed objects the SI Tracker 2 builds upon the proven performance of its predecessor with new facility for full motorised 3-axis remote control, pseudo real-time scan correction and greater accuracy all in a compact lightweight frame.
Designed to house the most modern high speed video cameras the SI Tracker 2 offers unmatched performance, durability and ease-of-use.
The new system provides consistent and accurate tracking of objects in flight using a computer-controlled triggered rotating mirror positioned in front of a high speed video camera.
Read full article: '3D Video Tracking System'
What's new in science : PRECOS Partners with Reliable Cancer Therapies
To Provide Rigorous Scientific Evidence for Complementary Cancer Medicines
NOTTINGHAM, UK - Preclinical Oncology Services Limited (PRECOS) has signed a partnership agreement with Reliable Cancer Therapies (RCT) to provide scientific validation of existing data for cancer therapies. The partnership will see PRECOS provide drug efficacy work to support RCT’s research on complementary medicines, so that evidence-based treatment choices can be made with confidence by patients and health professionals.
RCT is a Swiss private non-profit organisation dedicated to selectively funding the development of, and providing research-based information on, promising cancer therapies.
Rigorous scientific research is required for any medical therapy for ethical and safety reasons and this also applies to therapies that use herbs, vitamins, minerals and other natural substances.
Comprehensive research into complementary medicine is vital to ensure efficacy, safety, quality and cost-effectiveness of new therapies.
Read full article: 'PRECOS Partners with Reliable Cancer Therapies'
DAQ & DAS : New USB DAQ from Measurement Computing
NORTON, MA, USA -- /PRNewswire/ -- Measurement Computing Corporation has announced the release of three, high-speed, 16-bit USB DAQ devices with sampling rates up to 500 kS/s. Starting at only $399, the USB-1608G Series set a new standard for low-cost, high-speed multifunction DAQ.
The USB-1608G Series offers 16 analog inputs and up to two analog outputs, plus eight digital I/O, two counter inputs, and one timer output.
Read full article: 'New USB DAQ from Measurement Computing'
R & D : DecaWave Tapes Out ScenSor DW100 Chip
- Sample Silicon Available to Partner Firms from November 2011- Last Development Milestone Before Commercial Availability in 2012

Dublin, Ireland -- DecaWave has completed tape out of MPW2 of its ground-breaking DW1000 chip, the first product of the ScenSor family.
Sample silicon will be made available to DecaWave customers from November 2011.
ScenSor1 is a single chip Wireless Transceiver using Ultra Wideband radio technology, compliant with the IEEE802.15.4a standard and implemented using CMOS wafer technology. The combination of these attributes gives it some ground breaking capabilities.
DW1000 key features include its capability to locate objects indoors to a precision of 10 cm, and to communicate at data rates up to 6.8 Mbps from a range of 450 meters (with line of sight) and 45 meters (non-line of sight), at very low power consumption (transmitter power consumption is approximately 7 times lower than narrowband 802.15.4 transceivers and receiver power consumption up to 3 times lower) at very competitive price.
DW1000 conforms to the Institute of Electrical and Electronic Engineers IEEE802.15.4a standard.
Read full article: 'DecaWave Tapes Out ScenSor DW100 Chip'
New Products : Automated analysis for laser, test equipment and launch cord manufacturers
Beaverton OR, USA -- The 2440 Launch Analyzer from Photon Kinetics is the first fully automated test system for characterizing the optical power distribution of the light produced by VCSEL laser sources, multimode fiber test equipment and launch cords utilized in multimode fiber links. Built on over 20 years of experience testing the transmission and geometric properties of muitimode fibers, the 2440 Launch Analyzer is the ideal solution for ensuring that source launches comply with applicable international component specifications and measurement standards.
The 2440 can be configured for measurements in either or both the 850 and 1300 nm windows.
Features and Benefits
Read full article: 'Automated analysis for laser, test equipment and launch cord manufacturers'
New Products : Breakthrough 3D Optical Profiler for Production Floor Surface Metrology
Tucson AZ, USA --Zemetrics, Inc., a Zygo Corporation company, introduces the ZeGage™ non-contact optical profiler for quantitative shop floor measurements of 3D form and roughness on precision machined surfaces. The ZeGage profiler eliminates the need for vibration isolation or specialized enclosures, resulting in footprint reduction, cost savings and increased ease of use. The industry-ready design produces fast, accurate metrology in a compact, cost-effective package.
The ZeGage proprietary SureScan™ technology enables high precision non-contact surface metrology while providing fast and accurate measurements in vibration-prone factory floor production environments.
Read full article: 'Breakthrough 3D Optical Profiler for Production Floor Surface Metrology'
< 1 – 11 – 21 – 31 – 41 – 51 – 52 – 53 – 54 – 55 – 56 – 57 – 58 – 59 – 60 – 61 – 62 – 63 – 64 – 65 – 66 – 67 – 68 – 69 – 70 – 71 – 72 – 73 – 74 – 75 – 76 – 77 – 78 – 79 – 80 – 81 – 82 – 92 – 102 – 112 – 122 – 132 – 142 – 152 – 162 – 172 – 182 – 192 – 202 – 212 – 222 – 232 – 242 – 252 – 262 – 272 – 282 – 292 – 302 >
